相关文章

如何调整包装机振动盘

First confirm the vibration body located in the disk does locking;

其次将控制器按钮调至中间位置或调到数字130~180;

Then the controller buttons to the middle position or transferred to the digital 130~180;

第三将电源打开,查看振动盘输送速度是否达到要求;

Third power on, check whether the vibration plate conveyor speed to meet the requirements;

第四若没有达到要求,不断开电源,将锁付弹片之固定螺丝松脱任意一支,查看振动速度变化;

Fourth if you do not meet the requirements, continue to open source, the lock screw loosening for shrapnel of any one, check the vibration velocity;

第五若松脱弹片固定螺丝,振动速度变快,则表示弹片太厚,适度减少弹片数量或弹片厚度后再进行步骤4,再次调试;

Fifth if the loose shell fixing screw, vibration speed, said spring is too thick, moderately reduce the number of fragments or shrapnel thickness after step 4, debug again;